glimtrex
water-based wood protection glaze
water-based wood protection glaze
100 in stock
Couldn't load pickup availability
UV-resistant wood coating for exterior use.
For all outdoor wood exposed to climatic weather conditions, such as log cabins, facade cladding, fences, balcony cladding, windows, garden sheds, wooden gratings, garage doors, palisades, etc. Also suitable for renewing old open-pored paint finishes and weathered wooden surfaces.
Excellent preservative weather protection with good penetration. The product contains an active ingredient that protects the paint from mold, algae, and fungal attack .
Characteristics
- based on natural and renewable raw materials
- Film protection against mold, algae and fungal infestation
- highly water-repellent
- Protection against graying
- high and durable weather protection
- reliable UV protection
- easy to process
- low odor
- more open-pored, the wood can continue to breathe
-
Processing instructions
- Stir the container well before processing
- Old paint and varnish residues must be completely removed
- For open-pored old paintwork, clean it thoroughly beforehand
- Processing temperature (including drying) above + 8 °C.
- Wood moisture content not exceeding 18%. Humidity < 60%.
- Apply the wood protection glaze thinly and evenly with a flat brush or brush
- 1. If possible, apply the coat to all sides before installation
- The drying time is approximately 12 hours (at standard climate of 23° and 50% relative humidity)
- For new paint, apply 2-3 coats. (For renovations, one coat is usually sufficient.)
- Works differently on different surfaces. Test coats recommended.
-
consumption
1 liter of wood preservative glaze is sufficient for up to 10 m² per application . Depending on the type of wood and wood surface (rough sawn
or planed wood).With grooved wood, consumption can double.
For new paint, apply 2-3 coats. (For renovations, one coat is usually sufficient.)
-
storage
Cool, but frost-free.
Shelf life of 5 years in unopened containers.
Transfer opened container to a smaller, suitable container, seal airtight and use as soon as possible
glimtrex wood protection glaze is water-based and available in various natural wood tones:
- diamond red
- pine
- white
- beech
- walnut
- palisander
- cedar
- oak
- fir tree green
- transparent
Transparent is not suitable for outdoor use or only to a limited extent, as there is no UV protection
The Advantages of High-Quality Wood Protection Glazes
Glimtrex wood protection glaze offers numerous advantages:
UV Protection:
prevents graying and fading from sun exposure
Moisture Regulation:
is water-repellent, yet still breathable
Protection Against Fungal Infestation:
contains active ingredients against blue stain and mold fungi
Flexible Color Design:
Available in various color tones from natural to intense colors
Easy Application:
Simple application with brush, roller, or spray equipment
Care and Renovation
To maintain the protective effect permanently, glazed wood surfaces should be regularly inspected and refreshed when needed. In outdoor areas, depending on weather exposure, retreatment is required every two to five years. This significantly extends the lifespan of the wood and saves long-term costs for extensive renovations or even replacement of damaged components.